ATA8743-PXQW【PDF 149/238 页】MCU W/TRANSMITTER ASK/FSK 24QFN

收藏本站

您好，
买卖IC网欢迎您。
请登录
免费注册

买卖IC网

Sheet目录52

145页 146页 147页 148页 [149页]150页 151页 152页 153页

149

9152BINDCO02/10

ATA8743

" Bit 3..2 USICS1..0: Clock Source Select

These bits set the clock source for the Shift Register and counter. The data output latch ensures

that the output is changed at the opposite edge of the sampling of the data input (DI/SDA) when

using external clock source (USCK/SCL). When software strobe or Timer/Counter0 Compare

Match clock option is selected, the output latch is transparent and therefore the output is

changed immediately. Clearing the USICS1..0 bits enables software strobe option. When using

this option, writing a one to the USICLK bit clocks both the Shift Register and the counter. For

external clock source (USICS1 = 1), the USICLK bit is no longer used as a strobe, but selects

between external clocking and software clocking by the USITC strobe bit.

Table 23-2 on page 149 shows the relationship between the USICS1..0 and USICLK setting and

clock source used for the Shift Register and the 4-bit counter.

" Bit 1 USICLK: Clock Strobe

Writing a one to this bit location strobes the Shift Register to shift one step and the counter to

increment by one, provided that the USICS1..0 bits are set to zero and by doing so the software

clock strobe option is selected. The output will change immediately when the clock strobe is exe-

cuted, i.e., in the same instruction cycle. The value shifted into the Shift Register is sampled the

previous instruction cycle. The bit will be read as zero.

When an external clock source is selected (USICS1 = 1), the USICLK function is changed from

a clock strobe to a Clock Select Register. Setting the USICLK bit in this case will select the

USITC strobe bit as clock source for the 4-bit counter (see Table 23-2 on page 149).

" Bit 0 USITC: Toggle Clock Port Pin

Writing a one to this bit location toggles the USCK/SCL value either from 0 to 1, or from 1 to 0.

The toggling is independent of the setting in the Data Direction Register, but if the PORT value is

to be shown on the pin the DDRE4 must be set as output (to one). This feature allows easy clock

generation when implementing master devices. The bit will be read as zero.

When an external clock source is selected (USICS1 = 1) and the USICLK bit is set to one, writ-

ing to the USITC strobe bit will directly clock the 4-bit counter. This allows an early detection of

when the transfer is done when operating as a master device.

Table 23-2. Relations between the USICS1..0 and USICLK Setting

USICS1

USICS0

USICLK

Shift Register Clock Source

4-bit Counter Clock Source

No Clock

Software clock strobe

(USICLK)

Software clock strobe

(USICLK)

Timer/Counter0 Compare

Match

Timer/Counter0 Compare

Match

External, positive edge

External, both edges

External, negative edge

External, both edges

External, positive edge

Software clock strobe (USITC)

External, negative edge

Software clock strobe (USITC)

发布紧急采购，3分钟左右您将得到回复。

采购需求

(若只采购一条型号，填写一行即可)

*型号	*数量	厂商	批号	封装

添加更多采购

采购需求

发布成功！您可以继续发布采购。也可以进入我的后台，查看报价

发布成功！您可以继续发布采购。也可以进入我的后台，查看报价

我的联系方式